• The water circulates inside the BIO-UV reactor and the bacteria, viruses and algae that pass through it are eradicated.
• Every day, the dosing pump injects a small quantity of chlorine-free remanent product (BIO-UV OXYGENE REMANENT) in order to make the water disinfectant and prevent the appearance of algae on the sides of the pool.
• The automatic pH regulator enables the ideal pH comfort level to be maintained, prevents calcium deposits on the installation and optimizes the efficiency of the products.

During the filtration cycle the water passes through the reactor where ultraviolet rays are emitted (it’s a physical process) : water is thus disinfected.


So it will be necessary to make water disinfectant between 2 treatments through the reactor.




Thanks to the combination of UV-C and OXYGENE REMANENT action, this complete process allows that water is disinfected and disinfectant for the greatest comfort of swimmers.
OXYGENE REMANENT is particularly advised for interior pools, seldom used ones (second home) and pools equipped with diatom filters.

An alternative solution : you can inject every day a formula based on bromine thanks to a brominator.


In order to respect running legislation, water can be disinfectant with chlorine or bromine in the case of public and/or commercial pools. Injected doses are thus halved and limit uncomfortable residues and secondary effects linked to the use of halogen products. Ultraviolets are very interesting since it destroy a part of the by-products generated by the use of these molecules (chloramines).

BIO-UV pH regulator : confort, automatism, efficiency

• an adjusted pH for a bathing comfort without skin, eyes, mucous membranes irritation...
• peace of mind thanks to the automatism which continuously measures pH level,
• prevention of precipitations or calcium deposits, turbid or off-white water,

allows 

• to prevent algae and bacteria development,
• a better effect of disinfectant products,
• reduction of chemical products consumption.

Advantages :

• respects the ROHS environmental norm : components without lead nor mercury,
• numerical display,
• proportionnal regulation to avoid overdosing,
• simplified calibration,
• simple connection avoiding analysis problems : no more acid containers which empty within 24 hours,
• protected probe (material = abs) for a better reliability, can be installed horizontal, vertical or slantwise,
• delivered with all accessories and one more santoprene tube.

• Water disinfected by UV-C and disinfecting water thanks to the daily addition of small quantities of products that prolong the effect of the UV (BIO-UV REMANENT or OXYGENE REMANENT)
• Provides crystal clear, healthy water that is non-irritant for the skin, hair, mucous membranes and eyes allowing unrivalled comfort when swimming
• Environmentally friendly: thanks to the use of UV-C rays that have a physical action and residual products that are chlorine-free, with residues that are not toxic for nature or humans
• Chlorine-free, salt-free (prevents corrosion and chlorine by-products), no harmful chemical residues
• No risk of allergies
• Corrosion-free, odor-free
• Compatible with all types of coatings, materials and filters
• Automatic concept: thanks to the dosing pump and the BIO-UV pH regulation
• Simple and quick to install
• Reliable: no electronic involved
• Reduced after-sales service: lamp changed every 13 000 hours (depending on the number of switchings on)

pH REGULATOR REGULATOR UNIT
Dimensions	190 x 140 x 70 mm
Power input	230 V 50 Hz
Power	8 W maximum
Protection index	IP 54
Measurement scale	0 to 14
Maxi dosing pump flow rate	1.5 liter / hour
Maxi outlet pressure	1.5 bars
BNC input for sensor	yes
On/off switch	yes
Selection pH+ or pH- (factory set)	yes
Increased brightness display	yes
Remote control input	yes
1 x level probe (PP)	alarm for empty container

Up 

Diary

Resources